Prime Tools is a compression mould manufacturer in MIDC Ahilyanagar, Maharashtra, serving buyers in Chennai, Ambattur, Sriperumbudur and Oragadam. We build SMC, DMC/BMC and Bakelite compression moulds, and we make new inserts and carry out repairs for aluminium die casting dies.
Two kinds of work for Chennai buyers
Thermoset compression moulds
Electrical and automotive suppliers around Chennai use DMC/BMC and Bakelite for heat-resistant, insulating parts: terminal blocks, connector and fuse housings, switch parts and lamp holders. We build multi-cavity compression moulds for these parts, with hardened, polished cavities and even heating for short cure cycles.
Die casting die inserts
When a core or cavity insert in an HPDC or gravity die is worn beyond repair, a new insert costs far less than a new die. Send the drawing, a 3D model or the old insert details and we machine a replacement in hot-work steel, heat treat, polish and check it. Inserts are small enough to courier, so distance is not a problem.
Inserts from drawing or sample
Made from your drawing or 3D model, or reverse-engineered from the worn insert.
Courier-friendly
Inserts and spares travel to Chennai by courier in a few days.
DFM on every new mould
A free design review before steel is cut, on a video call.
Trial before dispatch
Compression moulds are trialled on our presses with first-off parts sent for approval.
Chennai-region work we take on
| Area | Typical makers | What we supply |
|---|---|---|
| Ambattur, Guindy, Thirumudivakkam | Electrical part and wiring device moulders | DMC/BMC and Bakelite multi-cavity moulds |
| Sriperumbudur, Oragadam | Automotive and EV component suppliers | Thermoset moulds, die casting inserts |
| Gummidipoondi, Ennore | Switchgear and power equipment makers | Insulator and terminal block moulds |
| Die casting foundries | HPDC and GDC aluminium casters | New core and cavity inserts, repairs |
How a Chennai project runs
- Send your part. Share the drawing or 3D model (STEP/IGES), material and annual volume by email or WhatsApp. We sign an NDA first if you need one.
- Free DFM review. Our engineers check draft, wall section, shear edge, charge and press tonnage and walk you through the report on a video call.
- Quotation and design approval. A firm price and lead time, then a 3D mould design for your approval before steel is cut.
- Build with photo updates. Machining, EDM, fitting and polishing in our tool room, with photos and videos at each stage, so Chennai teams can follow without travelling.
- Trial and first-off parts. The mould is trialled on our presses up to 400 tonnes. You get a trial video and sample parts, or you can attend the trial in person.
- Delivery. Compression moulds travel to Chennai by road, typically two to three days from dispatch. Inserts and spares go by courier.
More on our DMC, BMC and Bakelite moulds, die casting die repairs and inserts and mould repair.
We also work with buyers in Pune & Chakan, Mumbai & Thane, Ahmedabad & Gujarat, Bangalore & Hosur, Hyderabad, Delhi NCR, and export to the Middle East.
Send your part for a free DFM review
3D model or drawing, material and annual volume. We reply within one working day.