Your drawings stay confidential. We sign NDAs.

+91 9145700873 +91 8625919717 WhatsApp

Hyderabad · Balanagar · Jeedimetla · Patancheru

Dies and Moulds for Hyderabad and Telangana Manufacturers

Hyderabad manufacturers of electrical equipment, solar systems and electronic housings get thermoset compression moulds, mould repairs and die casting inserts from our tool room in MIDC Ahilyanagar, overnight by road.

EDM machine sparking a mould cavity detail in the Prime Tools tool room
EDM work on a mould cavity in our tool room
Tool room
MIDC Ahilyanagar
Road distance
About 550–600 km
Moulds and dies
1,000+ worked on
Since
2015

Prime Tools is a dies and moulds tool room in MIDC Ahilyanagar, Maharashtra, serving Hyderabad and Telangana. We build SMC, DMC/BMC and Bakelite compression moulds, repair and modify existing moulds, and make new core and cavity inserts for die casting dies.

A specialist tool room within reach of Hyderabad

Hyderabad's industrial belts at Balanagar, Jeedimetla, Cherlapally and Patancheru make electrical panels, transformers, solar equipment and electronic assemblies. Many of their housings, insulators and covers are thermoset. We build the moulds for those parts, and the trip from our tool room to Hyderabad is overnight by road.

Thermosets only

Every mould we build is a compression mould, designed for SMC, DMC/BMC, Bakelite or melamine.

Repairs that last

Worn shear edges rebuilt, cavities re-polished and re-chromed, flash and sticking fixed at the cause.

Die casting inserts

New core and cavity inserts for existing HPDC and gravity dies, plus repairs and modifications.

Clear reports

A DFM report before every new mould and a written report with every repair.

Hyderabad-region work we take on

AreaTypical makersWhat we supply
Balanagar, KukatpallyElectrical and precision component makersDMC/BMC and Bakelite moulds, repairs
Jeedimetla, GandimaisammaPanel, enclosure and junction box makersSMC enclosure and lid moulds
Cherlapally, UppalTransformer and switchgear part makersInsulator and terminal block moulds
Patancheru, PashamylaramSolar and power equipment makersCombiner box and housing moulds, die casting inserts
Compression mould with heavy flash before repair Clean moulded parts after the mould was repaired
A mould with heavy flash before repair, and clean parts after.

How a Hyderabad project runs

  1. Send your part. Share the drawing or 3D model (STEP/IGES), material and annual volume by email or WhatsApp. We sign an NDA first if you need one.
  2. Free DFM review. Our engineers check draft, wall section, shear edge, charge and press tonnage and walk you through the report on a video call.
  3. Quotation and design approval. A firm price and lead time, then a 3D mould design for your approval before steel is cut.
  4. Build with photo updates. Machining, EDM, fitting and polishing in our tool room, with photos and videos at each stage, so Hyderabad teams can follow without travelling.
  5. Trial and first-off parts. The mould is trialled on our presses up to 400 tonnes. You get a trial video and sample parts, or you can attend the trial in person.
  6. Delivery. Moulds travel by closed truck to Hyderabad, usually overnight. Inserts and spares go by courier.

More on our compression moulds, mould repair and die casting die repairs and inserts.

We also work with buyers in Pune & Chakan, Mumbai & Thane, Ahmedabad & Gujarat, Bangalore & Hosur, Chennai, Delhi NCR, and export to the Middle East.

Send your part for a free DFM review

3D model or drawing, material and annual volume. We reply within one working day.

FAQ

Are you a Hyderabad company?

No. Prime Tools is in MIDC Ahilyanagar, Maharashtra, about 550 to 600 km from Hyderabad. We work with Telangana buyers by email, WhatsApp and video call and deliver by road.

Can you repair a mould made by another tool room?

Yes. We regularly repair and modify moulds built elsewhere. Send photos of the mould and the problem for an estimate.

Do you make complete new die casting dies?

No. We repair and modify existing die casting dies and make new core and cavity inserts for them.

Do you make injection moulds?

No. We specialise in thermoset compression moulds (SMC, DMC/BMC, Bakelite, melamine) and in die casting die repairs and new inserts. Every mould we build is designed for the thermoset it will run.

Will you sign an NDA?

Yes. We sign your NDA before you share drawings, and customer names and part data never appear in our marketing.

Send your part for a free DFM review

  1. Send your part. 3D model or drawing, plus material and annual volume.
  2. Free DFM review. A report on draft, walls, flow, venting and ejection risks.
  3. Quotation. Mould price, steel and a lead time we commit to.
  4. Mould build. Typically 6–8 weeks, with progress updates.
  5. Trial and handover. Trial and first-off parts for your approval.

Please use your real details

  • Genuine name, email and phone only. Requests with fake details are filtered out automatically and will not be processed.
  • Don't worry, we don't spam. We are engineers, not salespeople. We only contact you about the part you send.
  • Just exploring? That's fine. If we call, simply tell us you are exploring or collecting information for a project, and we won't follow up.

How to fill this form: fields marked * are required. Give us an email or a phone number (both is best) so an engineer can reply. Attach a STEP or PDF drawing if you have one; it makes the DFM review faster.