Your drawings stay confidential. We sign NDAs.

+91 9145700873 +91 8625919717 WhatsApp

Chennai · Ambattur · Sriperumbudur · Oragadam

Compression Mould and Die Insert Maker for Chennai Manufacturers

For Chennai's electrical and automotive suppliers we build thermoset compression moulds and make new core and cavity inserts for existing die casting dies, from our tool room in MIDC Ahilyanagar.

New core and cavity inserts fitted in an existing die casting die
New inserts fitted in an existing die casting die
Tool room
MIDC Ahilyanagar
Road distance
About 1,150 km
Dies handled
100+
Moulds
SMC · DMC/BMC · Bakelite

Prime Tools is a compression mould manufacturer in MIDC Ahilyanagar, Maharashtra, serving buyers in Chennai, Ambattur, Sriperumbudur and Oragadam. We build SMC, DMC/BMC and Bakelite compression moulds, and we make new inserts and carry out repairs for aluminium die casting dies.

Two kinds of work for Chennai buyers

Thermoset compression moulds

Electrical and automotive suppliers around Chennai use DMC/BMC and Bakelite for heat-resistant, insulating parts: terminal blocks, connector and fuse housings, switch parts and lamp holders. We build multi-cavity compression moulds for these parts, with hardened, polished cavities and even heating for short cure cycles.

Die casting die inserts

When a core or cavity insert in an HPDC or gravity die is worn beyond repair, a new insert costs far less than a new die. Send the drawing, a 3D model or the old insert details and we machine a replacement in hot-work steel, heat treat, polish and check it. Inserts are small enough to courier, so distance is not a problem.

Inserts from drawing or sample

Made from your drawing or 3D model, or reverse-engineered from the worn insert.

Courier-friendly

Inserts and spares travel to Chennai by courier in a few days.

DFM on every new mould

A free design review before steel is cut, on a video call.

Trial before dispatch

Compression moulds are trialled on our presses with first-off parts sent for approval.

Chennai-region work we take on

AreaTypical makersWhat we supply
Ambattur, Guindy, ThirumudivakkamElectrical part and wiring device mouldersDMC/BMC and Bakelite multi-cavity moulds
Sriperumbudur, OragadamAutomotive and EV component suppliersThermoset moulds, die casting inserts
Gummidipoondi, EnnoreSwitchgear and power equipment makersInsulator and terminal block moulds
Die casting foundriesHPDC and GDC aluminium castersNew core and cavity inserts, repairs
Pair of new die casting core and cavity inserts machined in hot-work steel DMC part moulded cleanly after mould rework
New die casting inserts, and a clean DMC part from a reworked mould.

How a Chennai project runs

  1. Send your part. Share the drawing or 3D model (STEP/IGES), material and annual volume by email or WhatsApp. We sign an NDA first if you need one.
  2. Free DFM review. Our engineers check draft, wall section, shear edge, charge and press tonnage and walk you through the report on a video call.
  3. Quotation and design approval. A firm price and lead time, then a 3D mould design for your approval before steel is cut.
  4. Build with photo updates. Machining, EDM, fitting and polishing in our tool room, with photos and videos at each stage, so Chennai teams can follow without travelling.
  5. Trial and first-off parts. The mould is trialled on our presses up to 400 tonnes. You get a trial video and sample parts, or you can attend the trial in person.
  6. Delivery. Compression moulds travel to Chennai by road, typically two to three days from dispatch. Inserts and spares go by courier.

More on our DMC, BMC and Bakelite moulds, die casting die repairs and inserts and mould repair.

We also work with buyers in Pune & Chakan, Mumbai & Thane, Ahmedabad & Gujarat, Bangalore & Hosur, Hyderabad, Delhi NCR, and export to the Middle East.

Send your part for a free DFM review

3D model or drawing, material and annual volume. We reply within one working day.

FAQ

Are you located in Chennai?

No. Our tool room is in MIDC Ahilyanagar, Maharashtra. We serve Chennai buyers remotely and deliver moulds by road and inserts by courier.

Do you make complete new die casting dies?

No. For die casting we repair and modify existing dies and make new core and cavity inserts for them. Our new-mould work is thermoset compression moulds.

Can you make an insert without a drawing?

Often yes. Send the worn insert or a good part and we can reverse-engineer the geometry, then confirm it with you before machining.

Do you make injection moulds?

No. We specialise in thermoset compression moulds (SMC, DMC/BMC, Bakelite, melamine) and in die casting die repairs and new inserts. Every mould we build is designed for the thermoset it will run.

Will you sign an NDA?

Yes. We sign your NDA before you share drawings, and customer names and part data never appear in our marketing.

Send your part for a free DFM review

  1. Send your part. 3D model or drawing, plus material and annual volume.
  2. Free DFM review. A report on draft, walls, flow, venting and ejection risks.
  3. Quotation. Mould price, steel and a lead time we commit to.
  4. Mould build. Typically 6–8 weeks, with progress updates.
  5. Trial and handover. Trial and first-off parts for your approval.

Please use your real details

  • Genuine name, email and phone only. Requests with fake details are filtered out automatically and will not be processed.
  • Don't worry, we don't spam. We are engineers, not salespeople. We only contact you about the part you send.
  • Just exploring? That's fine. If we call, simply tell us you are exploring or collecting information for a project, and we won't follow up.

How to fill this form: fields marked * are required. Give us an email or a phone number (both is best) so an engineer can reply. Attach a STEP or PDF drawing if you have one; it makes the DFM review faster.