Your drawings stay confidential. We sign NDAs.

+91 9145700873 +91 8625919717 WhatsApp

Delhi · Faridabad · Noida · Gurugram · Manesar

Compression Mould Maker for Delhi NCR Switchgear and Wiring Device Makers

Delhi NCR is India's biggest cluster of switchgear and wiring device makers, and most of their parts are Bakelite, DMC or SMC. We build the multi-cavity compression moulds those parts need.

Core side of a compression mould with guide pillars in the Prime Tools tool room
The core side of a compression mould with its guide pillars
Tool room
MIDC Ahilyanagar
Road distance
About 1,400 km
Moulds
Bakelite · DMC/BMC · SMC · Melamine
Typical lead time
6–8 weeks

Prime Tools is a specialist compression mould maker in MIDC Ahilyanagar, Maharashtra, serving manufacturers in Delhi, Faridabad, Noida, Greater Noida, Gurugram and Manesar. We build Bakelite, DMC/BMC, melamine and SMC moulds for switchgear, wiring devices and enclosures, and repair existing moulds.

Moulds for the NCR switchgear and wiring device cluster

Switches, sockets, MCB housings, fuse carriers, terminal blocks and lamp holders are made in very large numbers across Delhi NCR. They are usually phenolic (Bakelite), DMC/BMC or melamine, moulded in multi-cavity compression moulds. Cavity-to-cavity consistency, short cure cycles and low flash decide what each part costs.

Multi-cavity moulds

Balanced cavities and even heating so every cavity fills and cures the same.

Hardened, plated cavities

Abrasive phenolic and glass-filled DMC need hardened steel and hard chrome to hold size over long runs.

Engraving that reads clearly

Ratings, logos and symbols engraved by EDM, with changeable inserts for different brands.

Remote, but close in practice

DFM on video call, photo updates, a trial video and first-off parts by courier before the mould ships.

NCR areas and the moulds we build

AreaTypical makersMoulds we build
Delhi: Bawana, Narela, Okhla, WazirpurWiring device and electrical fitting makersMulti-cavity Bakelite and melamine moulds
FaridabadSwitchgear and electrical component makersDMC/BMC breaker housing and terminal block moulds
Noida, Greater NoidaEnclosure, meter box and telecom box makersSMC enclosure and meter box moulds
Gurugram, Manesar, BawalAutomotive and die casting suppliersThermoset part moulds, die casting inserts

See our wiring device moulds and switchgear part moulds.

Copper electrode for EDM engraving of a mould cavity Cavity insert after EDM machining in the Prime Tools tool room
A copper EDM electrode and the cavity insert it machined.

How an NCR project runs

  1. Send your part. Share the drawing or 3D model (STEP/IGES), material and annual volume by email or WhatsApp. We sign an NDA first if you need one.
  2. Free DFM review. Our engineers check draft, wall section, shear edge, charge and press tonnage and walk you through the report on a video call.
  3. Quotation and design approval. A firm price and lead time, then a 3D mould design for your approval before steel is cut.
  4. Build with photo updates. Machining, EDM, fitting and polishing in our tool room, with photos and videos at each stage, so Delhi NCR teams can follow without travelling.
  5. Trial and first-off parts. The mould is trialled on our presses up to 400 tonnes. You get a trial video and sample parts, or you can attend the trial in person.
  6. Delivery. Moulds travel by closed truck to Delhi NCR, typically three days from dispatch, with transit insurance on request. Inserts and spares go by courier.

More on our DMC, BMC and Bakelite moulds, compression moulds and mould repair.

We also work with buyers in Pune & Chakan, Mumbai & Thane, Ahmedabad & Gujarat, Bangalore & Hosur, Chennai, Hyderabad, and export to the Middle East.

Send your part for a free DFM review

3D model or drawing, material and annual volume. We reply within one working day.

FAQ

Do you have a unit in Delhi NCR?

No. Our tool room is in MIDC Ahilyanagar, Maharashtra. We work with NCR buyers by email, WhatsApp and video call and deliver moulds by road.

Can you build multi-cavity Bakelite moulds for switches and sockets?

Yes. We build multi-cavity phenolic and melamine compression moulds for wiring devices, with changeable inserts for engraving.

How do we check the mould without visiting?

You get a 3D design for approval, photos during the build, a full trial video and first-off parts by courier before dispatch.

Do you make injection moulds?

No. We specialise in thermoset compression moulds (SMC, DMC/BMC, Bakelite, melamine) and in die casting die repairs and new inserts. Every mould we build is designed for the thermoset it will run.

Will you sign an NDA?

Yes. We sign your NDA before you share drawings, and customer names and part data never appear in our marketing.

Send your part for a free DFM review

  1. Send your part. 3D model or drawing, plus material and annual volume.
  2. Free DFM review. A report on draft, walls, flow, venting and ejection risks.
  3. Quotation. Mould price, steel and a lead time we commit to.
  4. Mould build. Typically 6–8 weeks, with progress updates.
  5. Trial and handover. Trial and first-off parts for your approval.

Please use your real details

  • Genuine name, email and phone only. Requests with fake details are filtered out automatically and will not be processed.
  • Don't worry, we don't spam. We are engineers, not salespeople. We only contact you about the part you send.
  • Just exploring? That's fine. If we call, simply tell us you are exploring or collecting information for a project, and we won't follow up.

How to fill this form: fields marked * are required. Give us an email or a phone number (both is best) so an engineer can reply. Attach a STEP or PDF drawing if you have one; it makes the DFM review faster.